Kuebler Draw wire enkoder za merenje dužine do 6m C120 ; D8.4C1.0600.XXXX.XXXX
Draw-wire encoder C120 The C120 draw-wire encoder can be used up to a measuring length of 6 meters. This draw wire can be combined with the proven Kübler Sendix...
Price on request
Draw-wire encoder C120
The C120 draw-wire encoder can be used up to a measuring length of 6 meters.This draw wire can be combined with the proven Kübler Sendix encoders with incremental or absolute interface as well as with analog sensors.
Robust
- Titanium anodized aluminum housing and stainless steel cables
enable use even under extreme conditions
- Low-wear cable exit due to special slide bearing guide
Versatile
High dynamics up to 10 m/s
- High acceleration up to max. 140 m/s2
- Fast fastening with 2 screws
- Various connection types available
| Mechanical | |
|---|---|
| Measuring system | Draw-wire encoders |
| Measuring length |
4 m 5 m 6 m |
| Speed | 10 m/s |
| Dimension | 120 mm x 120 mm x 120 mm |
| Connection types |
Axial cable M23 connector axial M12 connector axial MIL connector |
| Working temperature | -20 °C ... +90 °C |
| Protection level | IP65 |
| Weight | 1,60 kg |
| Electrical | |
|---|---|
| max. linearity | ±0,02 % |
| Interfaces |
Analog 0–10 V EtherNet/IP CANopen EtherCAT Push-pull TTL / RS422 SAE J1939 SinCos PROFIBUS DP PROFINET IO SSI, binary BiSS |
| Supply voltage | 12...30 V DC |
-
C120 en
Similar products:
Kuebler Draw wire enkoder za merenje dužine do 6m C105 ; D8.1XXX.XXXX.XXXX
Draw-wire encoder C105 The draw-wire encoder C105 can be combined with all encoders with 58 mm synchro flange and 6 mm shaft. Flexible and simple - Encoder replacement
-
(Out of stock)
Price on request
Kuebler Draw wire enkoder za merenje dužine do 6m C105 ; D8.1XXX.XXXX.XXXX
Draw-wire encoder C105 The draw-wire encoder C105 can be combined with all encoders with 58 mm synchro flange and 6 mm shaft. Flexible and simple - Encoder replacement
-
(Out of stock)
Price on request
Kuebler Draw wire enkoder za merenje dužine od 8m do 42.5m D135; D8.4D1.XXXX.XXXX.XXXX
Draw-wire encoder D135 The D135 draw-wire encoder can be used up to a measuring length of 42.5 m. This draw wire can be combined with the proven Kübler Sendix
-
(Out of stock)
Price on request
Kuebler Draw-wire encoder A50 - Order code with analog sensor (scaled to measuring range) - D8.3A1.XXXX.XXXX
Kuebler Draw-wire encoder A50 - Order code with analog sensor (scaled to measuring range) - D8.3A1.XXXX.XXXX
-
(Out of stock)
Price on request